Exton|OS 64 bit – based on Ubuntu 18.04.1 LTS – with Budgie Desktop, Refracta Snapshot, Calamares Installer and kernel 4.20.0-rc1-exton – Build 181109

NEWS 181109 ABOUT Exton|OS with Budgie Desktop 10.4 and Refracta Snapshot
The Desktop Environment in this Exton|OS build is Budgie 10.4. (Budgie is focused on simplicity an elegance. Designed with the modern user in mind). Program content in Build 181109: Refracta Snapshot, Calamares 3.1.12, Firefox, Gimp, SMPlayer, SMTube, and GParted. Also all necessary additions in order to install programs from source. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. Kernel 4.20.0-rc1-exton (corresponding Kernel.org‘s latest kernel 4.20-rc1) is used. All packages have been updated to the latest available version as at November 9, 2018. Study the NEW PACKAGE list. Google Chrome has been removed since it’s now possible to use Netflix in Firefox. Using Refracta Snapshot you can change everything to your liking and create your own live installable Ubuntu system. I mean create your own installable Ubuntu 18.04.1 LTS Live DVD once you have installed Exton|OS to hard drive.

MOST IMPORTANT CHANGES IN BUILD 181109
This Exton|OS version is for non-efi computers, which means that you can use the Calamares Installer in VirtualBox/VMware and thus install Exton|OS in any language. You can even use Calamares for installation to a USB stick and that way get persistence. Please read my instruction before you perform such an installation. Calamares Installer replaces Ubiquity (Ubuntu’s installer). Calamares Installer is also very simple to use. No “expert knowledge” is needed.

WHAT’S NEW in kernel 4.20?

IMPORTANT ABOUT REFRACTA Snapshot
Refracta Snapshot is pre-installed in Exton|OS Build 181109. Use them to create your own live installable Ubuntu system. I mean create your own installable Ubuntu 18.04.1 LTS Live DVD once you have installed Exton|OS to hard drive. I mean change everything and then create a whole new Ubuntu live system. Start Refracta from Applications >> System Tools >> Refracta Snapshot. You don’t even have to install Exton|OS to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Ubuntu system while running Exton|OS from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 15 – 40 min! You’ll find the ISO in /home/snapshots. (Or change that in /etc/refractasnapshot.conf). The whole thing is very simple.

SCREENSHOTS
Screenshot 1
– Exton|OS’s Budgie live Desktop
Screenshot 2 – Exton|OS’s Budgie root Desktop
Screenshot 3 – Exton|OS’s Budgie Desktop installing Spotify
Screenshot 4 – Exton|OS’s Budgie Desktop running Refracta Snapshot
Screenshot 5 – Exton|OS running in VMware
Screenshot 6 – showing how to add apps to Docky

READ MORE…

Advertisements

DebEX Barebone Build 181001 – a non-efi version with Budgie Desktop, Calamares Installer, Refracta Tools and kernel 4.18.11-exton

NEWS 181001 about DebEX Budgie – a Refracta Build
A new version of DebEX Barebone with Budgie Desktop 10.4 and kernel 4.18.11-exton (equivalent to Kernel.org’s latest stable kernel 4.18.11) is ready. You can download “my” kernel and use it in another Debian (or Ubuntu) system if you want. All packages have been updated to the latest version as of October 1, 2018. DebEX Barebone is now based on Debian Buster/Sid (upcoming Debian 10). Most important: The ISO has decreased from 1330 MB to 929 MB, which makes it easier to run the system live from RAM. That ability allows DebEX Budgie to be very fast, since reading and writing data from/to RAM is much faster than on a hard disk drive. This version of DebEX is a non-efi build for older computers. You can use the Calamares 3.2.2-1 Installer Framework to install DebEX Budgie to your computer in any language. You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers.

MOVIE about Calamares Installer
Watch a movie
about the Calamares installation process in VirtualBox. Log in to Budgie as user with password live or as root with password root (when running DebEX live).

Important about Refracta
You can use the Refracta tools (pre-installed in all three versions of DebEX) to create your own installable Debian Live DVD once you have installed DebEX to hard drive. I mean change everything and then create a whole new Debian live system. When you start Refracta it will look like this. You don’t even have to install DebEX to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Debian system while running DebEX from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 10 – 50 min! You’ll find the ISO in /home/snapshot.

SCREENSHOTS
Screenshot of the Budgie Desktop when running Netflix
The Budgie Desktop for the normal user user
The Budgie Desktop for root

READ MORE…

DebEX Barebone (Debian unstable/experimental) with Budgie Desktop 10.4, Refracta tools and kernel 4.15.4-exton – Build 180219

NEWS 180219 about DebEX Budgie – a Refracta Build
A new version of DebEX Barebone with Budgie Desktop 10.4 and kernel 4.15.4-exton (equivalent to Kernel.org’s latest kernel 4.15.4) is ready. All packages have been updated to the latest version as of February 19, 2018. DebEX Barebone is now based on Debian unstable/experimental. I.e. cutting edge software is used. Most important: The ISO has decreased from 1330 MB to 899 MB, which makes it easier to run the system live from RAM. That ability allows DebEX Budgie to be very fast, since reading and writing data from/to RAM is much faster than from a hard disk drive.

Important about Refracta
You can use the Refracta tools (pre-installed in all three versions of DebEX) to create your own installable Debian Live DVD once you have installed DebEX to hard drive. I mean change everything and then create a whole new Debian live system. When you start Refracta it will look like this. You don’t even have to install DebEX to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Debian system while running DebEX from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 10 – 50 min! You’ll find the ISO in /home/debex.

SCREENSHOTS
1. The Budgie Desktop when logged in as the ordinary user user
2. The Budgie Desktop when logged in as root
3. The Budgie Desktop when Refracta snapshot is running

READ MORE…

Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat!

EXTON OpSuS Tumbleweed – Budgie Desktop 64 bit Linux Live USB – Build 180125 – with USB persistence!

EXTON OpSuS Tumbleweed Budgie is based on openSUSE Tumbleweed, which is a rolling distribution. I.e. no need for new installations. Just run the command sudo zypper dup and you will always get the latest stable packages/kernels.

ABOUT
EXTON OpSuS Tumbleweed Budgie uses kernel 4.14.14-1. Desktop environment: Budgie 10.4 Desktop. Installed programs: Among many other programs, Firefox, Gimp, SMPlayer, NetworkManager, GParted and LibreOffice. You’ll run the system as root or as the ordinary user live. Root’s and live’s password is root/live. EXTON OpSuS can easily be installed to hard drive (of those who so desire). You’ll have to do it manually though – please read below. All programs have been updated to the latest available stable version as of January 25, 2018. The system language is English.

Installing to a USB stick with persistence and then to hard drive
After installing EXTON OpSuS Tumbleweed to a USB stick, you can change the system completely and then install the system (manually) to a hard drive. You can also continue to have it only on the USB stick. If you install EXTON OpSuS on a large enough (and fast) USB stick, you can go ahead and install for example LXDE, Mate or Xfce4. All your system changes are automatically saved to the USB stick. Note that you’ll have to use a different/new USB stick if you want to run EXTON OpSuS on another computer. That’s because certain files necessary for the configuration will be destroyed after the first boot. I.e.: You’ll have to use the same USB stick on the same computer all the time.

Manual installation of EXTON OpSuS from USB stick to hard drive
PREREQUISITE: You’ll have to have at least one Linux system installed on your computer and use Grub2 as boot loader. If so then follow my INSTRUCTION.

Why should someone choose EXTON OpSuS/openSUSE?
openSUSE is grossly underestimated (in my opinion). It’s a wonderful Linux system.

SCREENSHOTS
The Budgie Desktop with Yast2 running
The Budgie Desktop with Budgie settings running
Install commands
Installing to USB with Etcher

READ MORE….